Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - SUB602

Pages: [1] 2 3
1
General Discussion / Alcohol for Emissions
« on: September 14, 2016, 11:42:31 AM »
I gotta run my Blazer thru Emissions in the next few days. Bought some denatured Alcohol to add to the fuel. Read online it works.

Has anybody here tried this? Does it work?

2
Vendors or Shops you would recommend / Accident Doctor in Tolleson
« on: August 28, 2015, 04:56:02 PM »
For CDL physicals this is the place to go. Got my Physical today paid $35. In and out. Get there early though. He had a line at the door even before he opens.

3
Builds / 77 Jimmy
« on: August 26, 2015, 03:10:23 PM »
So I saved $1k  to buy axles for my Buggy build then came across this on Craigslist, and could not pass it up. Runs and drives. No fuel gauge so I can't take it too far. Steering has crazy amount of play. Think the worm gear in the gearbox is bad. Have alot of small odds and ends to take care of but a hell of a deal for a grand. Spent every penny I had saved so repairs have to wait til I get more coin.

Specs:

77 GMC Jimmy, modified 350 engine, 4 speed, np205, 4"lift, 33"tires, 8-lug axles, 4.10 gears.
















4
Wanted / Durango Front Axle/Center section
« on: August 03, 2015, 08:21:33 PM »
Center Section/front axle bearings are grinding. Would like just to swap it out with a known good part. If u know anyone with a 5.9l 00-03 Dodge Durango with 3.92 gears in the front center section I'm looking for one.

Thanks

5
Fabrication Tech / Welders
« on: December 20, 2014, 03:15:51 PM »
What are u guys using?

I had a lincoln electric mig 200, but im wondering if I really needed that much welder for welding on frames and suspensions.

6
General Discussion / Watson rd.
« on: February 03, 2014, 01:52:26 PM »
Anyone hear anything new about Watson Rd? Closed, not closed that sort of thing.

8
General / Dana 30 shims
« on: March 06, 2013, 12:00:42 PM »
Shims on a D30. If you have changed gears in a D30 did you leave the Shims between the carrier and carrier bearings or installed the bearings without them? If you installed the bearings without the shims where did you place them to shim the carrier?

I can't see leaving them between the carrier and bearing cuz then you have to continue to remove the bearing to add or remove shims to bet the backlash right.


9
Trail Runs / Krawl to the King
« on: June 29, 2012, 07:38:15 PM »
Anybody heard of this benefit run for Crown King on July 21st from Azkrawlers?. I got the flyer on my phone, but can't load it to the site. If you can find it and load it up here I would appreciate it. We gotta represent.

11
Jeep / Another Jeep question
« on: January 24, 2012, 08:37:36 AM »
I'm looking for the Upper control arm bushings that are installed in the Axle. Any of you XJ owners have a part number I can use?

Checked Autozone and Napa and can't seem to find the bushings I need, or the parts guy has no idea what I'm talking about.

So can I get some help from some Jeepers?  :thumbup:

12
Jeep / XJ Steering brace?
« on: November 21, 2011, 02:04:07 PM »
Ok since my XJ has 33' tires i keep reading its a good idea to get some kind of brace for the steering gearbox. Im looking at the brace that clamps to the box and attaches to the pass side of the frame. Will this brace do the job or do you recommend an additional piece like the frame plates?

I went down to 4 wheel parts today to see what they have but they didnt have anything in stock so i thought i better ask some of the Jeep guys what they are running or recommened before i buy.

13
General Discussion / Thanks Admins!!!
« on: November 08, 2011, 12:58:49 PM »
I just wanted to say Thank You to Eryc, Patrick, and Chuck for putting on another successful Florence Fest. Everyone got home safe and by looking at the pics it looked like one heck of a time. Although i wasnt there to participate this year i appreciate the effort you guys put forth to make this Annual event, and this site successful.
 
:beer: Cheers to the Admins!!!!!

14
Jeep / Xj questions
« on: October 01, 2011, 03:13:02 PM »
What is the oil pressure supposed to be at on idle and in gear on a 91 XJ, 4.0L?

Also what type of Trans fluid does the XJ use?

Thanks

15
Builds / 91 Jeep Cherokee
« on: September 29, 2011, 04:48:59 PM »
Guess who is the new Owner of a 91 Jeep Cherokee? Ok its me.  :headbang:  just picked it up an hour ago.

Straight trade for my Suburban. Needs  rear main seal, Which im gonna do tomorrow. Also needs Brakes and thats it.

Has a 3" lift and 33' Goodyear Wranglers that are only a few Months old. I scored on the tires alone. Ill get more details soon, but right now im gonna go out side and start getting it ready for its rear main seal replacement. Oh yea the Guy also had all the Parts to do the repair. Brand new in he box. All i have to do is install them :dance:




16
New Members / MOVED: sept23rd to the 25th
« on: September 05, 2011, 09:19:10 AM »

18
General Discussion / Getting Spotted in the Desert
« on: August 11, 2011, 11:15:20 AM »
Due to the Death of the Missing Offroader i would like everyone who can to give tips on how to get spotted in the Desert or Mountains if you are stranded. LETS KEEP THE CRITICISM TO A MINIMUM!!! JUST GIVE YOUR IDEAS PLEASE!!!!!

One i heard from work is to take your spare tire, and light it on fire. Maybe use gas of starter fluid to help ignite it.

But that should produce black smoke that can be seen from miles away and would be investigated by someone.

19
Trail Runs / Crown king August 27th, Night Run
« on: July 12, 2011, 03:46:00 PM »
 :hack:August 27th myself and some guys from work are gonna do a night run the Backway to Crown King. Will be Camping overnight probably do some fishing at Horsethief Lake than head home Sunday Afternoon. Were meeting at 7pm at the Airdown spot. Anyone is welcome!!

PLEASE have your riggin running as well as possible for this Run. Being at night adds difficulty already we dont need anymore. Also we will be doing a straight run to the top. Not looking to test our abilities on side trails. Again being at night already adds to the difficulty scale and most of the rigs that are going are just trail riders.

Thanks Guy's. Im excited to get some dirt under my tires so lets do some wheelin :headbang:

20
General Discussion / Happy Fathers Day !!!!!!!!
« on: June 19, 2011, 08:17:35 AM »
Happy Fathers Day to all the Dads on AORAZ. :beer:

21
General Discussion / Suburban Flop
« on: June 09, 2011, 10:50:15 AM »
Top Truck Challenge 2011 Suburban

22
General Discussion / Helmet or Seatbelt
« on: May 16, 2011, 11:00:09 AM »

Looks like this guy crushes his head. What do you think is he wearing his seatbelt?, or is the belt on and he should have just worn a helmet?

James rolls on the Maze trail.AVI

23
Truggy/Buggy / Legal Buggy ?
« on: May 05, 2011, 12:26:18 PM »
Im curious lets say you have a Blazer and you scrap the O.E. body and Tube it what needs to remain to still be  able to drive it in the street or be street legal?

24
Chevy / NP208
« on: May 03, 2011, 10:47:26 AM »
Hey i need to Re-Seal the 208 under my Suburban. Can i just seperate the cases and proceed to re-seal or do i need to remove a shaft or something?

I can look it up at work but its easier just to absorb someone elses knowledge on here ,especially if they have done it already. :beer:

As always i appreciate the help :thumbup:

25
General Discussion / Crazy Rollover
« on: March 28, 2011, 10:35:23 AM »
Check out the Rollover at :37 on this Video. The Editor of 4 wheel and offroad is very lucky to be around, and the music on this Video is way off.

Truck Group

Pages: [1] 2 3

SimplePortal 2.3.3 © 2008-2010, SimplePortal