Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - kkattfish

Pages: [1] 2 3 ... 9
1
Chevy / Alternator wiring qeustion
« on: October 13, 2017, 04:13:19 PM »
Is the below image correct in that all 3 wires from my alternator on my sbc 350 can go to the same post on my starter?
Bypassing all original wiring and don't want to buy a 1 wire right now just for this. 



2
Firearms, Hunting & Reloading / I'm a whisker biscuit owner
« on: August 07, 2017, 05:31:56 PM »
I guess I'm an archery hunter now.  Decided to finally get a bow after months of debate on a new hobby.  I love hunting and being outside so why not give myself another reason to get out. 
Bought a Bear Cruzer X entry level bow. 


I plan on doing over the counter deer and possibly turkey depending on where I have time to go. 
If anybody is into archery let me know and lets go out on a hunt. 


Been practicing every day since I got it and am hitting tight groups at 20 yards.  This weekend I'll take my pool fence panel down so I can shoot 30 and 40 yards

3
Truggy/Buggy / Which is stronger output for tcase 1410 or flange?
« on: April 19, 2017, 12:36:42 PM »
Looking at doing a round drive shaft once I get my front 3 link completed. 
What is stronger for a 205 tcase front output;  flange which is currently installed or a 1410?


Don't need to bring driveshaft angle into the disucssion just looking for strength since it's only a buggy and never streeted
It would be a non-cv driveshaft.


Figured we needed something new to talk about on here

4
General Discussion / Toys for Tots Donation / FF Donations
« on: December 19, 2016, 11:56:08 AM »
So by the time I got back from FF and got organized Thanksgiving was already upon us and I did not have time to get the collected money from FlorenceFest to a family.
Since then I had been looking for a family that could use the money but wasn't having much luck getting any contacts. 
I decided to make the $127 donation on behalf of AllOffRoadAZ to the Marines Toys for Tots Program.  They are a tax-exempt public charity under Section 501(c)(3) of the Internal Revenue Code.
Thought it would be good to post here and on FB so the members/persons that donated would know where that money went.

Thank you to everybody who donated.


5
General Discussion / Black Friday Deals or Discounts
« on: November 22, 2016, 12:46:51 PM »

http://www.ruffstuffspecialties.com/catalog/  -  Discount code GIVETHANKS 22.5% off until the 29th @ midnight

http://www.wfoconcepts.com/Default.aspx  -  20% off code: Turkey       Free shipping code:  Gravy

6
General Discussion / RTIC vs Ozark Trail Cooler
« on: November 22, 2016, 12:36:28 PM »
Recently upgraded my coolers and went with an RTIC 65 and Ozark Trail 73.


Below is an ice comparison when they were both brand new. 


20 pounds of ice in each one with 2 beers
Days were in the mid 80's to low 90's


In this comparison I believe the OT did a little bit better.  Both coolers were water at the 96 Hour check in.
Both did really well last weekend while wheeling. 





Start

24 Hours

Approximately 50 Hours



Approximately 72 Hours



7
Firearms, Hunting & Reloading / Elk & Antelope 2016
« on: January 19, 2016, 09:01:10 AM »
Getting close to opening for the draw. 
Anybody putting in?


I know Harley got a cow just a month or 2 ago.  I didn't get drawn last year.


Thinking we're going to put in for bull this year for our 1st choice, we'll see if we are lucky.
I'll buy an antelope point also

8
Fabrication Tech / Seat slider?
« on: November 12, 2015, 01:40:40 PM »
Anybody ever make a seat slider? 
really like this slider but not so much on the price  http://www.chassisunlimited.com/product/billet-seat-sliders/billet-aluminum-seat-loc-raw.html




Goal is to get my driver seat mounted so my kids can drive the rig and safely be harnessed in. 
I have the corbeau baja ss seat that flat mounts.  I will need to rework my seat probably but would like to figure this out. 


anybody have ideas, pictures, input?
heavy gauge flat bar and pins safe?

9
Firearms, Hunting & Reloading / First Deer
« on: October 27, 2015, 05:55:30 PM »
After 4 years of hunting I finally got something and it was an awesome experience. 
500 or so yard shot to top it off. 
Got him opening morning Oct. 23rd about 3 hours in to our hunt. 


Little guy but at least I get some meat instead of an empty tag


10
General Discussion / Austin, TX to Peoria August 22nd
« on: July 08, 2015, 07:52:04 PM »
I'm taking my daughter and her car to college in August.  I will be towing her car to Austin and dropping her off so if anybody needs anything picked up from Austin and brought back I'll have an empty trailer and bed.  I'll be returning Saturday, Aug. 22nd and will arrive in Phoenix Sunday the 23rd. 
For people that don't know me, I have a 20ft car hauler with a 2ft dovetail.

I have this up on pirate also

11
For Sale / Pelican 1660 case with foam
« on: June 14, 2015, 08:50:29 PM »

Help me buy a new steering setup and buy my old junk.  More stuff to come


Pelican 1660 case with foam that was used for laptop storage.  You could cut the foam to make it work for your needs.
Good shape, no broken latches, wheels or handles. 


$150 
















12
Fabrication Tech / Building or fixing a floor with sheet metal
« on: June 10, 2015, 05:36:12 PM »
What gauge sheet metal is good to build a floor and fix my rust spots in my rig?


Noob question because I have never worked with sheet metal.  should turn out sweet  :popcorn:

13
Vendors or Shops you would recommend / Northern DriveTrain is awesome
« on: June 05, 2015, 08:12:33 PM »
Ordered this morning about 8 am and order shipped by 6 pm same day. 
These guys have everything
http://www.northerndrivetrain.com/


would definitely recommend

15
Firearms, Hunting & Reloading / 2015 Deer who's putting in?
« on: May 18, 2015, 07:14:40 PM »
AZGFD opened their online lottery today. 
I put our group in for deer in 9 and 36B.  also bought my sheep bonus point
anybody putting in for deer or anything else?


we got skunked on elk so i hope we get deer.  if not we'll buy over the counter leftover tags to get out and do something

16
Trail Runs / May 30th weekend wheeling?
« on: May 17, 2015, 06:56:13 PM »
wife is going out of town to see her sisters baby the weekend of May 30th.
if my rig is done anybody want to wheel?

17
CARNAGE!!! / Broken Doubler index ring
« on: April 22, 2015, 09:56:57 AM »
Calling today and seeing what NWF can do to help me






18
General / square drive shaft with a cv?
« on: March 31, 2015, 03:12:21 PM »
any issues with building a front square dshaft with a cv?  i was looking at the parts and figured maybe it wouldn't work.  can't remember seeing a square with a cv in the past.
with the height of my tcase output i can't just do a straight square shaft.  i could try to find another stock shaft and lengthen it if necessary

19
General / Lets talk sticky tires
« on: March 27, 2015, 09:23:57 AM »
I think everybody has heard that reds have weak sidewalls but are great tires.  There is some debate on that but take it how you will.


I have heard that the sticky treps are good until they get wet.  strong sidewall and good dry grip.


anybody have any input on the BFG KRT-B's? 



What else is good or something you would recommend?  only interested in stickies at this time in 39-43 sizes




20
All Other Events / AZGFD EXPO
« on: March 21, 2015, 02:26:19 PM »
I'll be in Crown King next weekend so I can't make it but thought some of you may want to check it out


https://www.youtube.com/watch?v=TDZsCnMoVK8&feature=youtu.be

21
General Discussion / Happy Birthday Patrick
« on: March 17, 2015, 07:04:15 AM »
Happy birthday Patrick!  Drink a green one  :dance:

22
Trail Pics & Vids / Table Mesa
« on: March 16, 2015, 11:45:31 AM »

23
Trail Runs / Florence 3/22
« on: March 15, 2015, 07:03:15 PM »
Pat, chuck, tony are we on?  anybody else?
I am going to try and find another set of 63" leaf springs but I think I can wheel what I have if I don't find some before next weekend. 
Would like to probably go out sat. night to the flag pole and meet you guys sat. morning.  Tony would be with me
 

24
Trail Runs / Table Mesa this saturday?
« on: March 12, 2015, 09:28:35 AM »
Tony and I are going to do a day run to TM this Saturday.  Probably leave early sat. morning and wheel for a while.


anybody want to go?

25
General Discussion / LED light bars
« on: March 02, 2015, 02:53:39 PM »
Do we have enough interest to try and place another light bar order?  Speak up if you would be in and I will post the price sheets with newest pricing.  Be sure you want to do it though I don't want to go through the work to have a bunch of people bail out at the end.

Pages: [1] 2 3 ... 9

SimplePortal 2.3.3 © 2008-2010, SimplePortal