Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - kkattfish

Pages: [1] 2 3 ... 163
1
Builds / Re: The Beast 2.0?
« on: February 28, 2019, 06:06:59 PM »
It is almost boating season and the fishing should be good here real soon.
I'm working on my boat this weekend also. 

2
Builds / Re: The Beast 2.0?
« on: February 26, 2019, 07:36:17 PM »
That's looking pretty good Jake

3
Trail Runs / Re: 9th Annual Florence Fest
« on: November 08, 2018, 07:51:14 AM »
I'll probably leave Sunday morning.  Don't plan on wheeling Sunday

4
Trail Runs / Re: 9th Annual Florence Fest
« on: October 30, 2018, 06:46:05 PM »
I gotta work a half day so I can roll about 10.  I'll see if Amber can uber to my work so I can just take the rig loaded and head out from there.
sure wish that 202 was completed, maybe next year

5
Trail Runs / Re: 9th Annual Florence Fest
« on: October 30, 2018, 11:23:31 AM »
Amber and I will be out Thursday afternoon it looks like

6
Builds / Re: Big Little Buggy Build
« on: October 30, 2018, 11:17:38 AM »
Really nice build Chuck.  You are definitely fast and get a lot done in a short period of time.
Looking forward to seeing this done.

7
Builds / Re: JYD's new rig build
« on: October 31, 2017, 07:33:23 AM »

Edit:  This is my opinion which should carry no weight since I have no experience just a lot of reading on the subject.  You'd probably be better off talking to Davies as he is going to do his buggy and may be in the process of building the rear axle now.

You have a few options but it's going to be cheaper to find another 60. 
Links below are for reference on price and parts you may need if you go the 14b route

https://eastcoastgearsupply.com/i-19763386-gm-14-bolt-steering-front-axle.html

http://www.wideopendesign.com/Product/11415/14-Bolt-Steering-Axle-Assembly.aspx

http://www.pirate4x4.com/forum/general-4x4-discussion/2308274-14-bolt-steering-axle-build.html

8
Builds / Re: tha' 82
« on: October 19, 2017, 08:07:05 PM »
Oh, I forgot to add that I got some comfort items added as well.  A remote volume for my amp and a double 12 volt outlet for charging phone, gopro, etc. 
It's not in the picture but right under the dash.  I plan to do a switch for my winch as well.

9
Builds / Re: tha' 82
« on: October 19, 2017, 08:04:11 PM »
Thanks Pat. 

Got everything wired up, cleaned up the wires and did an alignment. 
Damn my eyes are way off is all I got to say.  I ended up cutting my passenger side arm too short, luckily I have tube to fix it.  Just need to get 2 bungs tomorrow from Foddrill.
Picking up my trailer tomorrow after work.  I need to do the bearings and fix a few wheel studs and that will be ready.
Hoping to get out Saturday about 10 am or so.  Weather.com says it should be a great day


10
Builds / Re: tha' 82
« on: October 19, 2017, 07:45:00 AM »
Anybody ever seen an ArtCarr shifter do this while bolted down or know what may have caused it?  I assume it's related to the cracked housing at the seams. 
Edit:  I took the shifter cover off and fixed this and re-routed the cable so hopefully that resolves the issue.



Got half of the dash completed for the panel.  The other half will house the 3 gauges I haven't purchased yet.
Coil over reservoirs mounted.










11
Builds / Re: tha' 82
« on: October 18, 2017, 06:59:36 AM »
Some progress. 
The 3 link is officially complete.
My brand new shiny radiator was great for about an hour until I stripped out the trans cooler threads in the radiator.  I'll be running an external cooler now






12
Chevy / Re: Alternator wiring qeustion
« on: October 16, 2017, 05:28:59 AM »
I did just loop #2 to alternator lug. Left #1 off.
Now I'm on to wiring my lights and accessories then mount my panel

13
Chevy / Re: Alternator wiring qeustion
« on: October 14, 2017, 07:00:54 AM »
The top picture below is what Patrick sent me on how he did his. 
The bottom picture is just another one I found while searching if you wanted to add an indicator. 




14
Chevy / Re: Alternator wiring qeustion
« on: October 13, 2017, 06:23:01 PM »
So, what you're saying is you know about as much as I do? haha  :lee:

Anybody else?

15
Chevy / Re: Alternator wiring qeustion
« on: October 13, 2017, 04:17:13 PM »
I was reading that diagram wrong. 
Basically what I'm needing to know is where do wires 1 and 2 go?
I have 3 going to the solenoid already.

16
Chevy / Alternator wiring qeustion
« on: October 13, 2017, 04:13:19 PM »
Is the below image correct in that all 3 wires from my alternator on my sbc 350 can go to the same post on my starter?
Bypassing all original wiring and don't want to buy a 1 wire right now just for this. 



17
Builds / Re: JYD's new rig build
« on: October 09, 2017, 12:56:26 PM »
Nice, didn't realize you were going to do werock

18
Builds / Re: JYD's new rig build
« on: October 09, 2017, 09:39:31 AM »
You planning to have it ready by next season?  Look forward to seing this thing get going.

19
Builds / Re: tha' 82
« on: October 06, 2017, 01:49:58 PM »
Just bought a 3 row aluminum radiator on ebay.  One more thing checked off the list

20
Builds / Re: tha' 82
« on: October 05, 2017, 05:39:55 PM »
Davies was over today and helped me solve problems I didn't even know I had. 

I ended up having to put a bend in my panhard bar to clear my diff on one side and the harmonic balancer on the other while flexed.  Glad my protools bender could bend the 1 3/4 .250 wall DOM
I was out of square but fixed that
Found out I need to move my shock mounts down about 2" for better up travel and to sit level
found out where I need to mount my bump stops and lenghts for limit straps
I can leave my brake lines how they are which is a win

It's still leaning but I'm not that worried about it anymore.  Davies thinks he has a spring that will work to level it.

I flexed it out pretty good finally and on the passenger side i get it to 15" of shaft exposed.  13.5" on the drivers side due to clearance




21
Builds / Re: tha' 82
« on: October 04, 2017, 10:03:19 AM »
I was dumb so you guys can sound smart!

If anybody else is going to get links hardened at Phoenix Heat Treat below is what was done and the 2 questions of what they asked me where I had no idea what the answer was.
My material was 2" x .250 wall 4130 chromoly

Their price is $125 setup charge and then .85 cents per pound

- The welds for the bungs aren't big enough to need normalizing
- When they ask what hardness it was 38-42





22
Builds / Re: Cocked-N-Locked Unlimited Chassis
« on: October 03, 2017, 07:15:11 PM »
That's the easy part

23
General Discussion / Re: How is ready for this years FF?
« on: October 03, 2017, 10:30:11 AM »
Good to hear Patrick

24
General Discussion / Re: How is ready for this years FF?
« on: October 02, 2017, 12:15:11 PM »
Not at all

25
General Discussion / Re: Who is ready for this years FF?
« on: September 26, 2017, 07:19:12 PM »
Just gonna say no right now

Pages: [1] 2 3 ... 163

SimplePortal 2.3.3 © 2008-2010, SimplePortal