Author Topic: Drag Blazer  (Read 8046 times)

ROCKZILLA

  • Administrator
  • Hero Member
  • *****
  • Location: Maricopa
  • Join Date: Mar 2010
  • Posts: 2568
    • View Profile
Drag Blazer
« on: July 10, 2019, 08:32:00 AM »
So I picked up this 1989 S10 Blazer cheap and my son and I are going to build a little drag toy out of it. I have a 389 Stroker with aluminum heads and a ton of other goodies, T400 transmission with a 3,000-3,500 stall converter and a 250 shot cheater nitrous kit. I've been gathering parts and I'm picking up the tubing to build a cage this week and should have it ready to do some test hits in about a month. Here are a few pictures.


It started life as a 1987 Samurai and turned into a Psychobilly Cadillac .
Wheel hard or stay home!
Build, wheel, break then repeat

ROCKZILLA

  • Administrator
  • Hero Member
  • *****
  • Location: Maricopa
  • Join Date: Mar 2010
  • Posts: 2568
    • View Profile
Re: Drag Blazer
« Reply #1 on: July 23, 2019, 07:43:04 AM »
We got the engine and transmission installed and got it fired up last night. It sounds wicked! I picked up the tubing Friday and we will start on the cage this weekend.
It started life as a 1987 Samurai and turned into a Psychobilly Cadillac .
Wheel hard or stay home!
Build, wheel, break then repeat

elmh

  • Sr. Member
  • ****
  • Location:
  • Join Date: Apr 2010
  • Posts: 395
  • rolling on nothing
    • View Profile
Re: Drag Blazer
« Reply #2 on: July 23, 2019, 10:10:45 PM »
Cool
Hoopty with some decent parts that usually end up breaking.

ROCKZILLA

  • Administrator
  • Hero Member
  • *****
  • Location: Maricopa
  • Join Date: Mar 2010
  • Posts: 2568
    • View Profile
Re: Drag Blazer
« Reply #3 on: August 12, 2019, 08:50:42 AM »
We have been pretty busy building this and have been able to make some great progress. The cage is just about completed, the fuel system along with cooling system is complete. We are just going down the to do list and checking things off as we go. The last big ticket item I need is the rear differential as we are going with a full float 9 inch. Here are a couple pictures of the progress.

« Last Edit: August 16, 2019, 09:53:56 PM by ROCKZILLA »
It started life as a 1987 Samurai and turned into a Psychobilly Cadillac .
Wheel hard or stay home!
Build, wheel, break then repeat

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1551
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: Drag Blazer
« Reply #4 on: August 15, 2019, 07:36:01 PM »
 :usa:

ROCKZILLA

  • Administrator
  • Hero Member
  • *****
  • Location: Maricopa
  • Join Date: Mar 2010
  • Posts: 2568
    • View Profile
Re: Drag Blazer
« Reply #5 on: September 04, 2019, 08:10:34 AM »
Well after a two week pause in building this I'm back at it trying to hurry up and get it done. More progress pictures of the new tires, wheels, rear leaf springs, CalTrac traction system, new 9 inch Ford based Grand National floater rear end, front bumper and air dam...yeah I've been busy. I need to finish the front loop and tie it into the cage, mount the shifter, and build the drive shaft to do a test run before painting it.
It started life as a 1987 Samurai and turned into a Psychobilly Cadillac .
Wheel hard or stay home!
Build, wheel, break then repeat

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal