Author Topic: blazer build  (Read 13235 times)

dave

  • Guest
Re: blazer build
« Reply #50 on: May 20, 2013, 04:21:02 PM »
Did some more work






elmh

  • Sr. Member
  • ****
  • Location:
  • Join Date: Apr 2010
  • Posts: 393
  • rolling on nothing
    • View Profile
Re: blazer build
« Reply #51 on: May 21, 2013, 05:32:12 PM »
Looks like a whole different rig should be pretty cool.   :beer:
Hoopty with some decent parts that usually end up breaking.

blazerv10

  • Hero Member
  • *****
  • Location: peoria az
  • Join Date: Sep 2010
  • Posts: 1142
    • View Profile
Re: blazer build
« Reply #52 on: May 21, 2013, 10:26:37 PM »
needs more triangulation
it was a jeep thing but all that sh** broke.

dave

  • Guest
Re: blazer build
« Reply #53 on: May 24, 2013, 05:51:52 PM »
Narrowed the front again 18 more inches




















BowtieBone

  • Hero Member
  • *****
  • Location: Peoria, AZ
  • Join Date: Mar 2010
  • Posts: 1329
  • It used to be a clean 93...then I met this group!
    • View Profile
Re: blazer build
« Reply #54 on: May 24, 2013, 08:04:20 PM »
Looks good, how's that going to affect air flow on your radiator? Doesnt look like you have a lot left open.
93 Blazer, 350 tbi, 4L60E trans, NP241C, rear 14 bolt welded, front Ford D60 spooled

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #55 on: May 24, 2013, 08:05:36 PM »
Damn I didn't think a blazer could be uglier than mine!!! I was wrong!! :vomit:

dave

  • Guest
Re: blazer build
« Reply #56 on: May 24, 2013, 08:43:36 PM »
You know man I heard that when I was narrowed 14 inches and its just going to get uglier and don't care about your apinion just like you don't care when it comes to your truck could of just tubed it but wanted something from the blazer to still be there


And ill figure out air flow when I'm there

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #57 on: May 24, 2013, 09:09:13 PM »
Do yo plan on narrowing the middle of the body to match the front?

dave

  • Guest
Re: blazer build
« Reply #58 on: May 24, 2013, 09:16:16 PM »
The body will be narrowed 20 inches

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #59 on: May 24, 2013, 09:22:40 PM »
Well that might help! I never understood the reason to narrow the front and keep the middle stock it all has to fit in the the hole you put it in not just the front fenders

dave

  • Guest
Re: blazer build
« Reply #60 on: May 24, 2013, 09:35:53 PM »
Really you never thought of your aprouch angle or you might have a chance of getting your nose in first then grinding your way in not just rejected at the beginning or come down on your fender and then it looks like youwere in a collision and now ratchet straps are your best friend or just bring the front in and keep it away from the rocks and not right over the out side of the tire hmmm I'm sure I can keep going why would any one do it then don't act like I'm the first norrowed body or not there is more plus than minus

dave

  • Guest
Re: blazer build
« Reply #61 on: May 24, 2013, 09:38:28 PM »
You have more options wgen you are not driving a sinder block

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #62 on: May 24, 2013, 10:29:02 PM »
Really you never thought of your aprouch angle or you might have a chance of getting your nose in first then grinding your way in not just rejected at the beginning or come down on your fender and then it looks like youwere in a collision and now ratchet straps are your best friend or just bring the front in and keep it away from the rocks and not right over the out side of the tire hmmm I'm sure I can keep going why would any one do it then don't act like I'm the first norrowed body or not there is more plus than minus
your Approach angle doesn't change when you narrow the front it will only change by cutting off the front of the truck or moving the front tire forward and getting rid of your leaf springs.  I am not bashing but my rig is still factory width in the front but heavily cut I know what you are trying to Achieve

dave

  • Guest
Re: blazer build
« Reply #63 on: May 24, 2013, 10:50:26 PM »
Well lets say you had no fenders or core support you don't think your tire being completly open ddoes not help any and having stock fender placment is just as good because you think it does not help aproach angles because were you wheel your going through a little hole that baraly fits a truck? you have never hit your fenders or what? act like it doesn't help who the f*** are you man lets consult the jyd before any modifications because he will let us know what is practicall or not mabey I want the fenders off the rocks and you would rather use them for sliders or to get hung up

Any one that needs a de motivater for there projects just talk to jyd he will hook you up!

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #64 on: May 24, 2013, 11:00:15 PM »
Well lets say you had no fenders or core support you don't think your tire being completly open ddoes not help any and having stock fender placment is just as good because you think it does not help aproach angles because were you wheel your going through a little hole that baraly fits a truck? you have never hit your fenders or what? act like it doesn't help who the f*** are you man lets consult the jyd before any modifications because he will let us know what is practicall or not mabey I want the fenders off the rocks and you would rather use them for sliders or to get hung up

Any one that needs a de motivater for there projects just talk to jyd he will hook you up!
there is not one piece of my rig that has not hit a rock at one time or another. I am not tring to cause your panties to start bunching up! I am sorry that you can not take a little bit of Constructive criticism! I wheel a fool size because of the little extra it takes to go where we want. I have also done every body mod you are trying and though if I could save you the head ache that I have gone though I would put in :2cent:

dave

  • Guest
Re: blazer build
« Reply #65 on: May 24, 2013, 11:07:12 PM »
Constructive criticism huh that's funny and let me get it straight you have also built a truck just like mine I would love to see a picture cuz I think your full of sh**

dave

  • Guest
Re: blazer build
« Reply #66 on: May 24, 2013, 11:07:50 PM »
2 cents

dave

  • Guest
Re: blazer build
« Reply #67 on: May 24, 2013, 11:12:23 PM »
You sound like obama thinking every thing should be your way

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #68 on: May 24, 2013, 11:30:36 PM »
here so you can go on with your build in peace!  nice built! :lee:

dave

  • Guest
Re: blazer build
« Reply #69 on: May 24, 2013, 11:31:35 PM »
f*** you jyd

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #70 on: May 24, 2013, 11:36:02 PM »
f*** you jyd
do you kiss your mom with that mouth? :crybaby:

dave

  • Guest
Re: blazer build
« Reply #71 on: May 24, 2013, 11:40:59 PM »
I'm glad some one on this site has done it all

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #72 on: May 24, 2013, 11:50:58 PM »
I'm glad some one on this site has done it all
I have never claimed to have done it all nor that I know it all! you posted a picture on an open site and didn't like my comment.

dave

  • Guest
Re: blazer build
« Reply #73 on: May 24, 2013, 11:57:47 PM »
Let pick apart each others rigs should be fun

JYD

  • Administrator
  • Hero Member
  • *****
  • Location:
  • Join Date: Mar 2010
  • Posts: 1549
  • f*** it! lets go wheeling!!
    • View Profile
    • ALLOFFROADAZ.COM
Re: blazer build
« Reply #74 on: May 25, 2013, 12:04:18 AM »
there are close to a 1000 pictures on this site of my rig have fun!

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal